Recipe: Gentle shine shampoo

A shampoo to gently wash the scalp!

Ingredient list
Recipient: Small tank (250mL)
Choose the desired quantity : mL
42.5 g
Water
20.0 g
35.0 g
1.0 g
0.6 g
2.0 g

Containers to use:
1 x Flacon (100 mL)
Cost: 4.59 € 4.59 EUR

TIME
20min

DIFFICULTY
Easy

CONSERVATION
90 days

COST
4.59 €
Share the recipe
Video of the recipe
 
 

Recipe

This shampoo gently cleanses the hair, removes impurities and excess sebum without drying out the hair.

Hair type: all hair types.

Concerns: impurities.

Texture : shampooing fluide .

Odeur : caractéristique de l’hydrolat choisie. 

Number of ingredients: 6

% of natural origin: 96.50%

vegan: yes

An excellent score on Yuka: 86/100

 

Description of ingredients:

 

Water : it is the solvent of the recipe. It dissolves the other ingredients.

 

Flower hydrosol: the hydrosol used makes it possible to perfume the product and according to the hydrosol chosen the virtues are different.

 

BeautyMix foaming concentrate: Surfactant 100% of natural origin, certified Cosmos and sourced in Europe, allowing to obtain a delicate and unctuous foam.

 

Mild preservative: Cosmos certified allows the product to be stored for 3 months, avoiding the proliferation of micro-organisms

 

Sweet almond oil: Oil certified organic and from Spain with nourishing and protective properties known to soothe fragile, sensitized and irritated skin (babies, pregnant women)

 

Or hemp oil: Vegetable dry oil, certified organic and from France and Germany, to balance hydration, soothe irritation and redness and restore tone and strength to the hair.

 

Lactic acid: Extract from Cosmos certified beetroot, origin France, with multiple functions thanks to its very good affinity with skin and hair.

 

INCI : Aqua, Mentha piperita flower/leaf/stem/water, lauryl glucoside, sodium coco-sulfate, cannabis sativa seed oil, caprylyl, capryl glucoside, sodium cocoyl glutamate, lactic acid, benzyl alcohol, dehrydroacetic acid
pH du produit fini : entre 4.5 et 5.5

Usage

Precaution before use:
For a first use, test your skin's tolerance to this new product by applying a small amount in the crease of the elbow.
Wait 24 hours to confirm no reaction, then you can use your product normally.

Use :
On your wet hair, distribute the shampoo on your scalp by gently massaging with your fingertips, a light foam will form to facilitate the distribution of the shampoo. Rinse thoroughly with clean water.
Precautions for use: In the event of contact with the eyes, rinse with clear water.

BeautyMix advice:

After your shampoo, to facilitate detangling but also to give flexibility and shine to your hair, use the detangling conditioner on the lengths and ends.



Precautions before starting

Before starting, it is advisable to clean and disinfect the work surface and the utensils: the prepared products will go on the skin, it is therefore necessary to avoid any microbial contamination!

Thoroughly clean the BeautyMix. Then, soak a clean cloth in 70° alcohol (available in supermarkets) and use it to disinfect the BeautyMix tank and all the utensils. Let dry.

Clean the work surface and remove objects that could get in the way.

Place a clean paper towel on the work surface, and place the utensils on it. Have available: a clean teaspoon or spatula, and a clean, dry container for pouring the preparation once ready. Wash hands thoroughly.

Respect the dosages indicated for the ingredients of the recipe.
Need more information ? Consult the "Getting Started" page.
Suggested products
Preparation
1
Thoroughly disinfect the work surface and the BeautyMix with 70° alcohol and clean paper.
2
Place the flat mixer in the BeautyMix bowl. Place the bowl on the scale.
3
Carry out the tare (zero) by pressing the T key. Weigh the required quantity of water.
42.5 g
4
Perform the tare (zero) by pressing the T key. Weigh the required quantity of the chosen hydrosol.
20.0 g
5
Perform the tare (zero) by pressing the T key. Weigh the required amount of foaming concentrate. Be careful, all foamers are different, this recipe is only suitable for BeautyMix ingredients.
35.0 g
6
Perform the tare (zero) by pressing the T key. Weigh the required amount of preservative (each drop represents approximately 0.02 g, pour slowly!).
0.6 g
7
Place the tank on the BeautyMix, and press the button 3 times to start the red program.
8
Take the tank, put its lid on the scale and put the tank on it (the scale being sensitive to heat, this prevents the weighing from being distorted). Perform the tare (zero) by pressing the T key. Add the chosen vegetable oil.
2.0 g
9
Carry out the tare (zero) by pressing the T key. Add the lactic acid (drop by drop, each drop represents approximately 0.05 g).
1.0 g
10
Place the tank on the BeautyMix, and press the button twice to start the blue program. Tip: to avoid foaming, let the blue program run for just a few seconds (about 30 seconds) and stop it by pressing the button twice.
11
Transfer to a clean, dry bottle, scraping well with a spatula or spoon.
12
To wash the tub, fill it up to the upper line of water with a little washing-up liquid and launch the first purple program by pressing once.
And There you go !